Best Hunting Spotlight Review

#1 Throw Distance

This is a typical component of the best hunting spotlight review, headlights, and center lights. Depict the most significant separation the light shaft can reach and enlighten. Current LED lights can sparkle a bright light emission across many yards. Typically, anyplace somewhere in the range of 100 and 300 yards can be viewed as an OK normal.

#2 Run time

Gone are the times of compact lights that were utilized to toss batteries. This is the time of battery-powered lithium-particle cells. Working time is the quantity of hours a light can accommodate a similar light yield before it drops to 10% of the essential return. A few electric lamps delayed down gradually, while others remain out of nowhere dim and dim.

The high-limit battery offers more extended run occasions. However, the for best hunting spotlight Australia disadvantage will be its weight. Run-time is likewise controlled by the brilliance setting utilized. With a high environment, most lights offer between 1 to 3 hours of run-time, while runtime execution times can be 7 to 14 hours or more.

#3 Beam Settings

The best hunting spotlight review accompany extraordinarily structured reflectors. A significant number of them offer a choice to switch between flood shaft and spot pillars. Flood bar is perfect for universally useful lighting in a more extensive region. Spot shaft is best for spotting prey rapidly, or specific ways when strolling/pursuing around evening time.

#4 Brightness Modes

It is in every case best to scan for lights with at any rate two unique modes: high and low. The individuals who do not have this essential element will, in general, be a settlement with one hand: you can’t expand their up-time by any means. On the off chance that you need to save vitality, you should turn it off. In any case, on account of low shaft lights, it can build up time or battery life and still get essential lighting. In a crisis, this could be a guardian angel.

#5 Quality

The best decision for hunting spotlights reviews is frequently a metal casing, generally made of aluminum. Be that as it may, most moderate producers pick high-thickness plastics to keep weight and costs low.

Snake Bite Stories: Real-Life Experiences that Will Scare You

This post will quickly look at some legitimate snake bite stories that will give you a reason to be more careful when you are out in the wild. Some of these stories may be unbelievable and others are downright scary, which can send chills down the spine. To prevent these horrific snake bite stories from happening to you, trap snakes so that they cannot reach your home or be prepared with a best snake bite kit to immediately get rid of the venom.

SNAKE BITE: A Petal child is recovering in a Jackson hospital after being bit in the face by a snake

An Amputated Thumb

Table of Contents

  • An Amputated Thumb
  • Stupid Declaration of Love
  • First Aid Treatment Failure
  • Bathroom Situation Gone Wrong

Some snake bites can kill you. Others, meanwhile, can cause a thumb to be amputated! This is exactly what happened to a person who has been bitten by a sharp-nosed viper, which is known to cause hemorrhagic shock to its victim. The bite first looked like a harmless cut. However, the snake that caused the bite is known for being extremely venomous and can quickly destroy the tissues. The walls of the blood vessels are damaged and internal bleeding happens. To prevent the venom from spreading, the thumb has to be amputated.

Stupid Declaration of Love

This story might seem romantic, but for others, this is actually disturbing and idiotic. A young Russian man who used to work as a zookeeper went across the board to show his wife his apology. He began a YouTube live stream to express how sorry he was for hurting his wife. To be able to grab attention, he had himself bitten by a black mamba snake. He encouraged viewers to text his wife and help him make things right. However, during the live broadcast, he died from the venom of the snake that bit his finger.

First Aid Treatment Failure

When a snake bites, first aid treatment should be administered as soon as possible. However, for this man from Tennessee and his friend, the first aid treatment did not work as expected. A man came into the house of his friend bringing a copperhead snake to determine its gender. Bringing such a kind of snake needs a permit. Otherwise, you can be detained for an illegal act. With this, when the snake bit the person inspecting it gender, the owner decided to extract the venom on his own. He did not call 911 because of the fear of being held by the police. Unfortunately, his friend was left unconscious and died shortly.

Bathroom Situation Gone Wrong

If possible, we avoid gas station bathrooms because they are known for notoriously being dingy. But, when nature calls, you have no other choice but to answer it. This is exactly what happened to a man from Texas. When he was already seated on the throne, he noticed a rattlesnake on the floor. Before he could even pull his pants up and make an escape, the snake bit him on his hand. The man, sadly, died because of the bite. Such a kind of snake is known for causing serious damage to its victim shortly after the bite if medical attention was not administered.

>>Read more:

How Long Do Tostada Shells Last?

The culinary colors of Mexico are mainly hot and very fresh colors because the dishes are made from rich sources of animal and plant materials such as corn, beans, chicken, pork, beef, potatoes, tomatoes, pepper, chili, onion, avocado, guava, peanut … In addition to the vibrant colors, Mexican cuisine is especially outstanding at the richness of the spicy flavor. It seems that these two characteristics are a combination of hot Latin and vibrant European style.

When it comes to quintessential Mexican cuisine, it is impossible not to mention tacos. However, besides tacos, there is also a quite outstanding dish, which is called Tostadas.

Tostadas mean messy. They are made of a fried crispy corn tortillas covered with mashed beans, mashed cheese, butter, chopped tomatoes, lettuce and salsa. It is made quite simple and does not follow any food recipes. It is usually made with a fried corn shell, above is ground beans, chopped cheese, salsa and lettuce.

Click here to see more making kits Best Commercial Tortilla Press(Review 2020) – 3 features the most special you need to consider when buying!

The origin of tostadas is to take advantage of old cornmeal, no longer soft enough to curl into tacos, but still eatable. Old corn cakes are fried in boiling oil until it becomes yellow, hard and crispy. To make the shell more attractive, Mexicans think of covering the surface of a cake with a filling of beans, chicken, ice cream, finely chopped lettuce, onions, butter and fresh cheese.

Nowadays, you can enjoy various types of tostadas. The most common is the type of chicken or pork tostadas, there are also seafood tostadas like tuna, shrimp, crab, octopus, and even vegetarian tostadas.

How to make tostadas shell?

How to make tostadas is quite simple and does not take too much time to prepare and process.

#1 Ingredient:

Corn tortillas

Vegetable oil


#2 Cooking utensils:

Frying pan

Paper towels or oil blotting paper

#3 Processing:

Pour into a frying pan for about 1 cup of vegetable oil, equivalent to half a pan.

Heat oil frying pan on high heat.

Dip corn tortilla into fried oil and fry for about 30 seconds on each side, until it is deep fried, yellow and crispy.

Remove the tortilla into a paper towels or oil blotting paper so that they absorb the excess oil.

Sprinkled with fried tostada has been dried a little salt and served with other ingredients such as tomatoes, butter, chicken, beef, etc.

How long do tostada shells last?

First of all, you need to determine which tortilla you have. And another factor determining how long torilla can last is where you keep them. Whether you keep them at room temperature, the refrigerator or freezer has different storage periods, and they all affect the shelf life of the package.

First for the freezer, you can keep tortillas in the freezer for 6 to 8 months, even through the expiration date printed on the package. This is the longest time that tortillas can exist.

Next, corn tortillas will last after their printing in room temperature for 7 to 10 days. And can last about 6- 8 weeks if they are kept in the refrigerator. For wheat tortillas, they can last about 7 days in room temperature and about 3 to 4 weeks in a refrigerator.

For homemade tortillas, they are safe from the printing day for 2-3 days if you keep them at room temperature. If they are stored in a refrigerator, they can still be safely used within 5-7 days. For tortillas made from spinach and made from wheat, they can last up to 7 days at room temperature, you can also keep them for 3-4 weeks in the refrigerator.

You can find more information about tostada shells in here.

Common Problems When Using Portable Blenders and How to Fix Them.

A portable blender is one that features a single-serve cup or just a juicer that you can quickly take with you to the gym, office or on a road travel. Juicers make kitchen work much comfortable during mixing, pureeing, liquefying and chopping food. They can only serve you well if they are working correctly. This guide informs on the way a juicer functions, what goes wrong in most cases, the methods of inspecting a blender’s problem and the tools you require to service the blender. It also provides steps on the criteria of tightening a blender’s stud and disassembling a mixer.

What is the Working Criteria of a Portable Blender?

A portable food blender operates on an engine that activates the sharp-edged device to cut food. Inside the unit, is an engine rod which connects to the edge. The amount of current supplying to the engine using the switches controls the speed of the shank. Juicers are designed based on two varieties, that is hand-held and countertop models.

Common Problems Associated with Blenders


Basing on the fact that juicers are small appliances operating on a motor, their common problems are also minor. These may include:

  • Loose parts.
  • Leaking seals.
  • Worn parts.
  • Motor failure.
  • Electrical cord problem.
  • Faulty switches.
  • Fuse breakdown.

How Can You Identify a Blender’s Problem?

  • It might happen that your blender does not function entirely. If this is the case, first make sure power is activated at the source then examine the electrical cable. Use a multimeter to assess the fuse. Carry out trials on the two-speed knob. If all these procedures don’t give a solution, then there is a need to sample out the general mechanism.
  • In a case where the blender is running periodically, examine the connection with the wires and make necessary replacements. Look into the engine to see if there is a need for change.
  • Sometimes you get to notice that the blender does not propel consistently. In this scenario, confirm the two-speed knob and perform necessary cleaning or replacement. Asses on the connection of wires and fix them to excellent condition.
  • On some occasion, you get to realize that the engine is propelling, but the chopping device does not turn. The issue usually is the moving frame. You may be required to reinforce or swap it if necessary. Check the edge as well, clean it, lubricate or make a replacement if faulty.
  • Stuck buttons: This is common on old-school blenders. To fix it, just carry out an in-depth cleaning exercise on the mixer. Some of the models allow you to detach the face that surrounds the buttons. To other models, you have to unloose the bottom of the base to get to the buttons.
  • The leaking of the jar- This issue is the most common with blenders. First, check if the blade assembly fixes well onto the pot. If all is well with the blade, then check with the rubber gasket. This rubber can harden and crack over time.

What do I Require for Servicing?

The parts you need for the replacement of your blender are readily available at the manufacturer. You may also get them in supermarket outlets. These are tools you will require to break up and repair your juicer. They include:

Servicing Procedures.

The breakup steps differ with the model of the blender you have. The following procedures are adequate for basic portable mixers.

How to service the Multispeed Switch.

A multispeed switch is a frequent victim when things go astray with a blender. The steps below are involved in repairing a multi-switch:

  • Remove the base of the mixer.
  • Check the switch without unplugging it. Usually, the fault is the terminal, of which might require tightening.
  • Inspect the multispeed switch using a tester.
  • The switch is usually vulnerable to damage because of its location on the blender. Clean the switch using a powered cleaner or replace it if there is the need.

How to replace the fuse.

A fuse on a blender offers protection to the motor from overload. It blows when the current supplying to the motor exceeds the standard rate. Here are the ways you can use to check if the fuse is functioning well:

  • Disassemble the blender and get to the fuse location. The device is usually in between the wire that loops the motor to the multispeed switch.
  • Get the fuse from the wire and examine it using a multimeter. If the connection is incomplete, then the fuse is blown.
  • Locate a brand new fuse with similar rating and make necessary replacement.

How to service the Motor.

In most cases, the motor is the part of the blender that withstands frequent problems for long. However, if it demands a replacement, you better decide to shop for a new blender. Servicing a motor is straightforward. Employ the following steps:

  • Examine every cord point.
  • Choose the desired mode of speed on the speed button and get the feedback from the meter.
  • Turn the drive stud in a forward motion. If the resistance alternates, the motor requires fixing.

How to tighten the Drive Stud:

Fault in the motion frame occurs when the blade does not turn usually. In most cases, the stud is loose. The most appropriate ways of tightening the stud include:

  • Disassemble the blender from its base.
  • Tightly hold the drive shaft using pliers and connect an adjustable spanner to the framing.
  • Grip the drive shaft slowly and at the same time turn the moving frame in a forward motion.

How to service the blade Assembly.

This part has minimal performance on a blender. The moving frame propels it. The most common issues involve leakages in the jar. You can solve this by tightening the base.

Lastly, it’s high time that you should be made aware of these common problems with blenders and be advised to plan for their remedy. Thus the solution to these issues demands integrated measures to tackle the challenges of individuals with different types of kitchenware and not only the handling of blenders. The previous doubts should change for the daily achievements in a modern kitchen. This guide shades light on a broad field of common problems with portable mixers and how to fix them. The information extends either directly or indirectly into almost every phase of kitchenware maintenance. It appears that a comprehensive review on portable blenders has been covered to conduct an organized procedure to many of the problems in question.
Amazon’s Choice for “portable blender”

What Is The Best Way To Eat Jackfruit?

Have you ever eaten jackfruit? What do you know about them? Jackfruit is a large fruit, prickly on the outside. Original from Southeast Asia, jackfruit is common throughout Asia, but Westerners are not used to eating this fruit.

#1 About jackfruit

Jackfruit grows directly from the trunks of trees. A jackfruit can get weigh up to 100lbs and reach 35 inches in length.

This fruit is known as the largest tree fruit in the world and also has the most excellent flavor as well.

When jackfruit is cracked open, you will find a yellow fleshy covering the seed inside. There are many recipes that have been created by this fruit. Its seed can be roast or boil, and the fruit can also be used to replace pork or chicken for a vegetarian dish.

Beside, jackfruits are nutritionally rich, including minerals, vitamin B, antioxidants and high amounts of protein.

#2 Preparing jackfruit

Jackfruits are contained a much amount of very sticky sap, so the easiest way to opening them is oil the fruit’s exterior, all the surfaces of knife’s blade that you will use to open them and also your hands as well. This will helps you easier to clean up at the end.

Slicing the jackfruit in the lengthwise by a long sharp knife. In the middle of jackfruit, you will see a large white core, remove this core out of the fruit.

Then use your oiled hands to split flesh apart from the fruit out. After that, taking out the seeds by cutting lengthwise of this flesh.

 #3 Best way to eat jackfruit

Like the other fruit, the best way to eat jackfruit is to enjoy it fresh immediately after open. It also can be used for jackfruit smoothie, mix with yogurts like a desert or a topping on ice cream. Jackfruit can go well with fruit salads and cooked as a vegan meat substitute.

What to consider when buying the best omelette pan?

Omelette is one of the typical dishes in every breakfast or a snack for brunch. It is not a very complicated dish, but if you are a person with no cooking experience, this is a challenge.

This challenge becomes even more difficult when you do not have a suitable pan. Therefore, you should invest in the best omelette pan to make preparing the omelette easier.

The omelette pan is a suitable tool for you to prepare omelette dishes, but to choose the best one is not easy.

To help you choose the most suitable omelette pan, we’ve put together a few things to consider:

#1 Material

Material is always one of the factors that you should consider first before buying an omelette pan.

Material factors determine many things like durability, cooking time and most importantly help the eggs do not stick to the pan, you can easily flip the egg more.

Currently on the market there are many types of omelette pan made from materials such as carbon steel, aluminum, stainless steel and non-stick.

Among them stainless steel and non-stick are the most common materials. These are ingredients that can help you easily turn the egg without sticking to the pan.

You should also choose the right material for your home kitchen. Not all materials can integrate with current top cookers.

#2 Shape and size

An omelette pan is usually round, and this is also the most common shape. However, there are many different omelette pan shapes available today to make it easier to flip eggs.

The choice of shape is based on each person’s personal preferences, but if you don’t have a lot of cooking experience, a square omelette pan will help you cook more easily.

The size of an omelette pan should not be too large, 6-12 inches is the most reasonable size.

#3 Design

Any kitchen appliance should be designed with certainty.

The handle section should be firmly fixed to the pan so it won’t fall off easily when you handle it. It should also not be made of materials that can heat up easily so you do not burn when holding.

What are the best dual purport batteries for boats?

When it comes to off-shore angling, the best batteries for boats is absolutely essential. I have a small boat so I am looking for the best battery for boat motor with an affordable price and compact size that do not takes a lot of space in my boat. After several hours researching, I found that the dual propose battery is best style for my boating adventures. Visit this website for more information.

Dual purport batteries can be use as the starting battery for motor, it also provides enough power for all the electronics equipment in your boat over a day fishing out on the water. Here are my top 4 of dual purport barriers that I consider as best boat batters and want to share with all of you.


#1 Mighty Max Battery Deep Cycle AGM Solar Battery Replaces

This Mighty Max Battery may not the most powerful and effective dual purpose batteries out there but the reasons that makes me put it at top 1 of this list is because it perfectly suit my need. If you have the small boat, looking for the friendly budget option with compact size, this is the best battery for you.

This battery type is targets for small boats with light-trolling capacities. You do not need to worry about how to mount it to your boat or whether it compatible with your boat or not as it is very versatile and easy to install.

Although it is named deep cycle battery but this one also can work for starting boat motor. It is designed to be spill-proof which ensure its long life span and without any possible risks. Plus, for who are not experienced angler, this battery does not require high technical knowledge to be operated and installed. It also does not require you much effort to maintain it.

One of the most important factor I consider when choosing the batteries for my small boa is the size of battery. It measures 7.68 inches x 5.16 inches x 7.13 inches, what makes it one of the most compact marine batteries, convenient for caring around and does not bulky when being installed in the boat. However, since it has the moderate reserve capacity Mighty Max ML35-12 may only suitable for small to medium boats.

#2 Odyssey 34M-PC1500ST-M TROLLING Thunder Marine Dual Purpose Battery

The Odyssey Thunder Marine Dual-Purpose Battery is one of the most common batteries, it standing at top 1 of many favourites marine battery lists. This is because it offers users amazing starting power and excellent deep cycling capability. It is also highly appreciated due to the long-lasting charge.

Odyssey Thunder Marine Dual-Purpose Battery provides the overall power that twice times stronger and three times longer life-span than conventional marine batteries. However, due to these amazing feature, this battery also relatively expensive and heavy.

Since it is made from high-quality case material, this battery ensures the durability for such a long time. Although this is not the friendly budget option but you will get the great investment that worth your money. It is very difficult to find the other dual purpose batteries that can beat Odyssey Thunder Marine battery in terms of construction and performance.

#3 Optima Batteries 8012-021 D34 YellowTop Dual Purpose Battery

I consider this dual purpose battery from Optima is great value for the price at you will get the high performance, effective battery with very affordable price. This yellow top battery from Optima has a great amount of voltage power of cranking that will keep the engine in your boat run for longer.

It does not require any maintenance due to its leak-proof design and super vibration resistant. The only thing you have to note about this product is that you should not use it in temperatures. This battery many be overheated if your overcharge it.

It can be used for the boats that requires medium to higher electrical loads. However, this one may not suitable for all kind of boats so ensure it fit your boat before using.

Related to batteries for boats

Top Sales Product Link Price
Power Wheels 12-Volt Rechargeable Replacement Battery, Multicolor from $69.94
Power Wheels 00801-1778 Charger, 12 Volt from $20.79
Replacement Battery for Fisher-Price Power Wheels 12-Volt Battery from $44.99
Power Wheels 6-Volt Rechargeable Replacement Battery from $43.32
SafeAMP Wire Harness Connector for Fisher-Price Power Wheels 12-Volt SLA Battery from $10.99
ExpertPower 12v 7ah Rechargeable Sealed Lead Acid Battery from $23.44
Power Wheels by FISHER-PRICE 00801-1661 Orange TOP Battery from $71.95
ExpertPower 12 Volt 12 Ah Rechargeable Battery with F2 Terminals || EXP12120 from $27.99
12V 18AH Hour Battery Works with Modified Power Wheels New w/Warranty from $44.99
Gray 12V Power Wheels Battery + 12 Volt Gray Charger w/ Probe 00801-1480 from $98.89
Power Wheels Fisher Price 12 Volt 12v Gray Battery Charger For 00801-0638 from $21.50

What is the best durable non-stick pan for gas stove?

It is can’t be denied that non-stick pan have many benefits. It is useful for cooking eggs, fish fillets, or other delicate items. The best nonstick pans for gas stoves must distribute heat evenly and be good for a good number of year.

This is because the drawback of non-stick pans are easy to damage and has a shorter lifespan than uncoated cookware. Although I think nonstick coated pans are convenient, I advise you to get the durable and quality nonstick pan, what can last for 5 years in your kitchen.

#1 Price and Brands

Even under proper care, the delicate surface of nonstick pan always has a shorter lifespan than other pans, because the nonstick coating will inevitably wear off. Higher price non-stick pans from reliable brands are often provide better quality.

Due to my experience, if you want to purchase on a quality non-stick pan for your gas stove, I think $20 to $60 is enough to spend on a pan that will give you three to five years of use.

Not only that, when looking for non-stick pan, you should ensure that this pan come with a limited lifetime warranty. However, these guarantees won’t cover wear and tear so you also need to use carefully.

#2 Dishwasher- and oven-safety

I have use one of my nonstick pans with dishwasher and after 20 minutes, my pan was ruined after the dishwasher subjected them to a stainless-steel scrubber.

Dishwasher-safe pa saves you time and energy. Oven safety is also useful for a range of dishes since it allows you to move your pan from the gas stove to the oven to finish cooking or keep warm.

However, even your non-stick pan is dishwasher safe, I not recommend you often use it with dishwasher as the heat levels ruin the non-stick coat and shorter the lifespan of the pan.

#3 Types of nonstick coatings

There are two common nonstick coatings are PTFE and Ceramic. PTFE is short for polytetrafluoroethylene, this is a synthetic polymer that repels water and reduces friction. However, the production process of PTFE can pose health hazard for people working in and living around factories.

Ceramic coating is not actually ceramic, but a ceramic-like coating called sol-gel. Creamic coating are often touted as being “greener” or better for you than PTFE. But the main drawback of ceramic pans is that their nonstick properties don’t last as long.

What are the best materials for glass top stove cookware?

Glass top stoves have an elegant and modern design that always adds aesthetic to the kitchen. However, when it comes to using a glass top stoves, not just any type of cookware will do. You have to use proper pots and pans for your glass top stove.

Any wrong thud or clank of the wrong material, and the smooth surface can be easily scratched. Before purchasing a particular set, you should have a good knowledge of cookware for glass top stoves. Here are some good materials that make the best pots and pans for glass top stove.

#1 Stainless Steel

Stainless Steel is highly recommended to use for glass top stove. Ideally, you should use stainless steel cookware with a “sandwich” construction. That means the pot and pan will have the middle layer of copper core or aluminum. It combines both the strength of regular stainless steel with the heat distribution capabilities of copper or aluminum.

Stainless steel is cost-effective, durable, and looks great. Besides, the smooth stainless steel bottom makes it totally safe to use on a glass top stove. One additional benefit is that the stainless steel cookware is easy to clean.

#2 Heavy-Weight Aluminum

Heavy-Weight Aluminum pots and pans are a great choice for cookware for glass top. Aluminum cookwares are tend to be less expensive and do the great job of conduct heat. It conducts heat faster than other metals and cooks evenly. Sometimes you may notice that Aluminum residue scratches on the cooktop, but you can remove it if it is cleaned immediately.

The only downside of aluminum is that there has been a lot of controversy around the dangers of aluminum in cookware and the reaction between the cookware and acidic or alkaline foods.

#3 Copper Bottom

copper pans are also good to use on the glass top stove. Copper has a superior heat conductivity and the cookware has very precise heat. However, you should be careful when using copper bottom cookware for your glass top as they can leave residues on the cooktop that appear as scratches. Overcooking them in the glass top stove also will leave a residue that will permanently stain the cooktop.

#4 Titan

Titan is less common materials than other types as they are expensive. Titanium is also fairly lightweight but it does not conduct heat very well. Titan cookware can be used for glass top but not ideal material.

What Are The Different Types Of Terrarium Heater?

If you are concerned about the heating matter for reptiles and looking for best the terrarium heater, you should know that there are several different ways to heat terrarium.

Choosing the type of heater devices will depend on your reptile’s requirement, your preferences and also your budget.

If you are unsure what are the best aquarium heaters, and there are many things you do not know about reptile heater, follow this post about the most commonly available terrarium heater that use for reptiles.

#1 Heat pads

The heat pad is the device that normally placed in the bottom or sides of the terrarium. The placement of the heating pad will depend on your species of reptiles. Heat pad provides the warmer part in the cage where reptiles can stay on when they need to increase their body temperature.

The heat pat creates the warmer part in the cage that means the opposite part of the cage will be cooler. This will make the gradient temperature for your reptiles.

Heat pad does not emit light, therefore you can use this heat source even at night without bothering your reptile. Due to this, the heat pad is suitable for nocturnal reptiles.

#2 Radiant heat lamps

There are 2 different types of radiant heat lamps are incandescent and halogen heat lamps. Heat lamps are the best option for the reptiles that prefer to bask such as bearded dragons and corn snakes.

Halogen lamps will better maintain humidity since it is less likely to dry the air than incandescent lamps. But incandescent lamps have strong power and cheaper.

#3 Ceramic heat emitters

Ceramic heat emitters offer the infrared heat and not emit light. Therefore you can use it even at night and do not mess up the day and night cycle of your reptiles. It is important to use a ceramic heat lamp with a thermostat to prevent overheating the enclosure.

#4 Mercury vapor bulbs

Mercury vapor bulbs provide both heat and UVB rays for your reptiles.  There is a down back that cannot connect mercury vapor bulbs with the thermostat. Due to this, it is unsuitable for using mercury vapor bulb in the enclosure since it can overheat your reptiles.